Subject to revision to correct errors and omissions and/or in the interest of fairness.��� GMU policies and procedures take precedence should there be a discrepancy between any of them and this syllabus.
DO NOT SEND ANY
ATTACHMENTS to any of my email addresses
Homework is not accepted by email
Other contact information will be given in class.
Office: TBD - best to see me before or after class
TBD
Contact the TA for MATLAB� questions.
Contact me for any course administration questions.
Tues Thurs�
Time:�� 12h00 - 13h15J **
Bldg.- Room --� IN�� -�� 137
(but see schedule of classes for recess, reading day, holiday closings, one time exceptions, snow cancellations, reschedulings and final exam.� )��
Check the GMU phone number for late breaking snow cancellation information.
(Click to see Planned Detailed schedule : Lecture and assignments.
Some generic� assignment dates will be instantiated in class
The schedule� shows� the planned sequence and date.� Weather delays and guest lectures may cause changes.� If we are able to move faster, items may be done sooner and additional topics or review be done at the end of the semester.
To follow the schedule below as closely as appropriate.
Selected parts of the textbook will be covered as noted.�
Additional topics will be discussed where they most closely relate to the text sequence.
Students must ensure that their GMU email is active and working in order� to receive announcements and other information broadcasts for this course.��
Information may also� be given in class.�
This course will extend and use the systems engineering and related skills normally developed through previous classes and as would be used in a business teamwork environment. �Soft skills as well as technical ones will be exercised.
Analysis methods of systems engineering design and management are covered.�
Lab exercises to be solved with software tools ( eg� MATLAB) will be assigned.
Be exposed to a wide number of processes, tools, methods, approaches, and analysis methods.�� Use a number of them to develop skills in� analysis.
Key items covered include:
� Analysis approaches
� Design
� Management
� Decisions
� Economic analysis - Life Cycle Cost
� Optimisation
� Probability and Statistics
� Queueing Theory
� Management Control
� Reliability and Maintenance
� Overview of Six Sigma Tools
� Transforms and Duals, morphisms
� Introduction to LP and Game Theory
� Teamwork - Team Project
Text:� Blanchard & Fabrycky
Systems Engineering and Analysis 3E (selected sections)
For help with research, Kelly Jordan, Information Technology and Engineering Librarian, is a useful resource.� Stop by the Fenwick library or email her at [email protected].
For help with writing,� the GMU writing center may be useful.� There are many web sites that provide writing and grammar assistance.� Many universities have on line writing centers� (OWL = online writing lab) for assistance.� The GMU center is at
http://writingcenter.gmu.edu/owl/
Others are listed at
http://owl.english.purdue.edu/internet/owls/writing-labs.html
http://www.writerswrite.com/writinglinks/ucenters.htm
http://www.departments.dsu.edu/owl/labs_oth.html
http://owl.wsu.edu/otherowls.asp
http://writing.colostate.edu/links/index.cfm?category=owls
http://writing.colostate.edu/references/processes/group/index.cfm?guides_active=processes
Peer Review Writing Process
http://writing.colostate.edu/references/processes/peerreview/index.cfm?guides_active=processes
Whilst grammar and style are� important, quality content is the first priority.� Do not get sidetracked with mechanics before the content has been instantiated.�� But allow time to create a quality document.
A project will be handed out in class to be done by a team.
All students will be assigned to a team.
Additional lab problems will be handed out in class.
Most of these will be for individual effort.�
There may be more than one team problem in total.
There will be a three short hour exams and a final exam.
Additional individual problems will� be assigned and collected.
All students are required to grade and critique their teammates performance.�
A lessons learned after action (AALL) report is required of all students to address what worked and what can be improved with the course.
There may be random unannounced quizzes.� The probability of which is inversely proportional to class attendance.�� I.E. the more people missing the more likely a quiz will be given.
Homework will be collected each due date and at least one problem graded at random.�
Grades will be per GMU policy.�
Students will be required to turn in a self assessment as well as one for their team.� Students will assess the other presentations.
Grades will be based on the following items - with the noted relative weighting factors.
� Final exam & AALL report� -�� 30%
� Hourly exams� - 20/3 each - NB exam scores can be increased some by a better score on the final
� Team Project - 25 Writing/content
� Individual team based grades may be adjusted up or down based on teammates recommendation andor instructor's observations
� Quizzes and special problems - 15
� Class participation Daily (textbook) assignments -� 10
� Bonus points may be awarded for
�exceptionally outstanding work
�previously approved additional work
Some parts of exams may be take home, other parts done in class.
Late work is NOT accepted .
If you are late to class, your work is late too.
All assignments are due at the beginning of class and must be handed in.
No E-Mail submissions will be accepted.
If you anticipate� any religious holidays, employer mandated travel, health appointments, or critical personal issues (tax audits, court appearances, funerals, weddings, etc.),� that will require you to miss class or be late with work please notify the instructor as early as possible.�� And coordinate with your team so they are not impacted too.�� Confirming documentation is� required.
A+������ 98-100+
A�������� 93-97
A-������� 90-92
B+������ 87-89
B��������� 83-86
B-������� 80-82
C+����� 77-79
C������� 73-76
C-������ 70-72
Etc.
Grades are computed by Excel based on the scores earned for the items listed above.
Attention should be paid to the honor code provisions.
Exams and individual problems� are to be done individually.
You may discuss individual problems but you must actually do the solution yourself.� Specifics of exam solutions are not to be discussed.
All� other work is open book, open notes, as would occur in an industrial environment.�� For academic purposes though, acknowledgement must be made of sources used including help from classmates.
Except for exams, all work is to be done collaboratively with their team, and/or the class.� Teams may help each other but acknowledgement is to be given to such help.�
Proper credit is to be given to any other information sources used by citing them in the Team Report.
Use the GPO or Chicago style manuals for citation format.
Use the
Harbrace College Handbook or Hacker are good guides for grammar usage.
�
The Chicago Manual of Style� 13E (or later)
U of
Style Manual rev.
GPO 1973 (or later)
http://www.gpoaccess.gov/stylemanual/browse.html
Rules for Writer 3E� (or later)
Diana Hacker
The
http://www.columbia.edu/cu/cup/cgos/idx_basic.html
All applicable laws and GMU policies are hereby included by reference.
Students are responsible for knowing the school policies as documented in the Catalog.�
Smoking is not allowed in the classroom.
All notes should be annotated with a timestamp and the source.� Acknowledgement of all sources is expected if material from a textbook, website, inter-team collaboration, or class discussions is used.
Students are expected to
� attend all sessions on time.�
� Turn in assignments� at the beginning of class
� be prepared
� participate actively
� be alert, having had adequate sleep and rest
� manage their time effectively
� plan their work and budget their time
� keep a log of all resources expended - this will not be collected for syst302 unlike syst371 where it is mandatory
� do not get behind
� coordinate and work with their team effectively and collegially
� first attempt to do all the work by themselves
� ask for help when necessary
You may synchronise your watches by telephone at 202 762 1401.
Teamwork is an integral factor of this course.� All students are expected to work in a collaborative and cooperative manner both on their project team and in the class as a whole.�� Planning and coordination are expected to minimise duplication of efforts.
Communication is vital to success� and will be emphasised through in‑class briefings concerning the team projects and written status reports.
Any student needing accommodation for a handicap will be given whatever course modifications they need as determined appropriate by the DRC staff.�� The DRC form is required.
Specific assignments will be given in class relating to the text book problems
Additional items will be assigned in class for individual solution.
The team project problem(s) will be handed out in class.
Exams may include a� take home component.�
Please provide hardcopy of all assignments.� Softcopy is also required for the final report and presentation.��� MS Project files need to be in MSP-98 format not 2000 or XP.�� Other files should be readable by Office-97 versions of word, excel, access, powerpoint, etc.
Please use a font that is 12-14 points, with 2-3 points of leading for text.�
Do not justify.��
Use 1.5" left margin and all other margins set at 1".
If headers/footers are used and/or page numbers, then they should be spaced 1/2" from the text body.
Do not use Garamond or (new) times roman or similar fonts with small x‑height or tight tracking.��
Please use American Typewriter aka
Editor, or Dark Courier.� Other large
x-height fonts with uniform stroke weight may be used; but, please confirm
readability with the professor first.�
Fonts can be provided to those who do not have them and are unable to download them from Microsoft, HP, or public domain sites.
Spreadsheets and similar items should use Arial Narrow 8-10 point.
---------
notes:
**�� J = local time.� We change from EST to DST in April.
==========================================
Return to course requirements
Project Description - Detailed course� Requirements
Due by 12h00�
The team project problem(s) will be given out in class.